• Knowledge Center

    You are here for information about our products.

H.265 VS H.264: Comparison between H.265 (HEVC) and H.264 (AVC)

What’s difference between H.265 and H.264? This H.264 vs H.265 comparison shows you how H.265 (HEVC) advantages over H.264 (AVC)and help you find the best codec for video delivery without struggling with shortage of bandwidth, storage and quality.

The rise of 4K and 8K videos throws down a challenge to the current video compression standard H.264 since it no longer manages to encode Ultra HD videos at a satisfactory bit rate than the HD content. Contrarily, the next-gen H.265/HEVC video compression standard gains upper hand over H.264, thanks to its better compression efficiency. H.265 (HEVC) allows 50% reduction of bit rate yet delivers the same video quality as H.264 AVC, or in other word, greatly enhances the video quality and lower the artifacting at the same bit rate compared with the H.264 AVC. So to speak, H.265 is becoming the most commonly used formats for video compressing, distributing and recording 4K/8K UHD contents, let alone the HD/SD videos. So what is H.264? What is H.265? This H.264 vs H.265 comparison will focus on the definitions of High Efficiency Video Coding H.265 and Advanced Video Coding H.264, along with the differences between the two standards H.265 and H.264, based on file size, bandwidth usage, bit rate and quality.

What is H.265 (HEVC)?

H.265 is also called High Efficiency Video Coding (HEVC). As its name suggests, H.265 is twice high efficiency than H.264 when encoding video. Namely, it halves the bit rate at the same level of video quality compared with its predecessor. It is targeted at next-generation HDTV displays and content capture systems which feature progressive scanned frame rates and display resolutions, as well as improved picture quality in terms of noise level, color spaces, and dynamic range.

What is H.264 (AVC)?

H.264 or MPEG-4 AVC is a video coding format that is currently one of the most commonly used formats for video content compression and delivery. H.264 reported bit rate savings of 50% or more compared with its predecessor MPEG-2 Part 2. It has a wide range of applications, covering all compressed video ranging from low bit-rate streaming applications (YouTube, iTunes, Vimeo, Facebook, Instagram) to various HDTV broadcasts over terrestrial, cable, and satellite. It is also commonly used for Blu-ray Discs, DVD storage, IP packet network, and digital cinema applications with nearly lossless coding.

H.265 vs H.264: Compression Ratio

H.265 (aka HEVC) doubles the coding efficiency compared with its predecessor H.264. This means H.265 video saves around 50% of the bit rate at the same quality of coding. Specifically, the average bit reduction for H.265 is 64% at 4K UHD, 62% at 1080p, 56% at 720p and 52% at 480p. So if you download HEVC H265 movies instead of H264 movie, you can play HEVC on iPhone Android device with 50% storage saved. And the movie quality won’t be affected at all.

H.265 vs H.264: Bandwidth Use

H.265 is superior to H.264 regarding to the bandwidth usage. Because H.265’s algorithm uses the efficient coding, H.265 promises approximately 40-50% of reduction in transmission bandwidth needed to compress the video (e.g. in 720p) over H.264 at the same video quality. So you can enjoy 4k video smoothly even at 1-2 Mbs bandwidth constrained network connection. On the contrary, the UHD videos encoded with H.264 will be watched at a stuttering mode.

H.264 vs H.265: Quality

The big difference between H.265 and H.264 lies in the video quality at the same bit rate. In H.264, the border areas of the block are likely to be distorted, because each macroblock is fixed and the data is independent to each other. While H.265 offers sharper detailed on faces and fabrics and smooth gradient areas with less blocking and fewer artifacts, since the new standard determines the size of code unit based on regional information. So H.265 is better than H.264 when it comes to compress a video with better image quality.

HEVC vs H.264: File Size

The great compression ratio also has a great relationship with the digital storage requirement of video streams and transmission. The reduced bandwidth leads to smaller file size. Test shows a video encoded with H.264 is 1-3X larger than H.265. This is favorable for hard drive storage or the device with limited storage space required to house the video data.

HEVC vs H.264: Performance Comparison

H.265 vs H.264, which one is more suitable for you for videos playback? Of course, H.264 codec is applicable for almost all common devices. But things are not feasible to H.265. For devices that can decode HEVC video, performance is a concern.

H.265 VS H.264: Side-by-Side Comparison between H.265(HEVC) and H.264(AVC)

Category H.265/HEVC H.264/AVC
Name MPEG-H, HEVC, Part 2(Approved in Jan 2013) MPEG 4, Part 10, AVC (Introduced in 2004)
Application Area 1. Professional H.265 Encoder/Decoder

2. High definition videos like 1080p, 4K, 8K resolution videos

3. Next-generation HDTV, Satellite TV

1.Blu-ray discs

2.Streaming internet videos from Vimeo, YouTube, iTunes Store etc.

3. Web software like Adobe Flash Player and Microsoft Silverlight

4. HDTV broadcasts over terrestrial, cable, and satellite

Key Improvement 1. 40-50% bit rate reduction at the same visual quality compared to H.264

2. Potential to realize UHD, 2K, 4K for Broadcast and Online (OTT)

1. 40-50% bit rate reduction compared to MPEG-2

2. Led the growth of HD content delivery for Broadcast and Online

Progression Successor to MPEG 4 AVC, H.264 Successor to MPEG-2 Part
Specification 1. Support up to 8K UHDTV (8192×4320)

2. Supports up to 300 fps

3. 3 approved profiles, draft for additional 5 ; 13 levels

1. Support Up to 4K (4096×2304)

2. Supports up to 59.94 fps

3. 21 profiles; 17 levels

Drawbacks Computationally expensive due to larger prediction units and expensive Motion Estimation Impracticable for delivering 4K/8K UHD content due to high bit rate requirements. Frame rate support restricted to 59.94.

Conclusion:

H.265 has many advantages over H.264, e.g. It supports up to 8K UHDTV (8192×4320 maximum), 4:4:4 and 4:2:2 chroma sub-sampling, supports up to 300 fps (earlier versions only supported up to 59.94 fps), data rates of several GB/s, and file size ‘subjectively’ half the size of H.264 with better quality! The H.265 has potential impact on accelerating 4k screens demand and sale, offering higher quality video even in bandwidth constrained network, etc.

LCD Video Wall for digital signage

As digital signage technology continues to expand, digital displays are exponentially increasing in size. Video walls are used in a variety of places where disseminating information is important and advertising is possible. This can include:

Auditoriums / Atriums / Broadcasts on-air / Concerts and events / Museums / Retail / Universities / Corporations / Hospitals / Casinos / Hotels.

Fortunately, there are a full range of digital signage technologies you can leverage for a video wall solution that works best for your business. Some of the key considerations before integrating a video wall solution should be:

Ease of implementation / Image quality / Location (indoor vs. outdoor) / Design flexibility / Physical footprint / Ease of maintenance and cost of repairs / Viewing distance.

What is an Ultra Narrow Bezel LCD?

When it comes to a video wall solution, LCDs have been the popular option for years, and an ultra-narrow bezel LCD is one of the best suited for the job. LCD stands for “liquid crystal display” and chances are, you use this technology every day with your smartphone.

LCD panels in a video display are composed of a layer of liquid crystal that is sandwiched between two polarized pieces of glass. When electricity is applied, the liquid shifts to create an image. Since the crystals in this liquid do not produce their own light, a backlight is created to illuminate the display. LEDs are the most common means of backlighting LCDs, and the technologies are often advertised as a package deal, i.e. “LED-LCD.”

Although LCD video walls are tiled like LEDs, there are spaces in-between the displays known as “bezels.” The ultra-narrow bezel design is the most ideal for video walls because it creates the smallest seams. In fact, with the liquid technology and a narrow bezel, video walls can display a highly uniform brightness.

Pixel Construction

Each pixel in an LCD consists of a molecular layer aligned between transparent electrodes and polarizing filters. Pixel is determined by an electric field and the placement of light. Other features:

Single multi-layered LCD module / 2M cells in the module / Pixel structure less visible / Dense pixel (compared to LED) / Advantages to Ultra Narrow Bezel LCD Digital Signage.

There is a reason why LCD technology has always been the prime choice for video walls. The following are some of the advantages to choosing this hardware for your digital signage installation:

Brilliant and fluid colors / Higher resolution / Energy efficient – reduce power consumption up to 50% / Most affordable option on the market / Easy to size and install / High uniform brightness / Slim installation depths / Better for indoors / Hardware is simple and easy to maintain / Brightness ≥ 500 – 700 cd/m2 / Ultra-narrow and takes up little space.

Please note, with the release of new sub-2 mm bezel gap displays, they have now become very fragile during installation. Due to the small piece of sheet metal holding the glass in place, any force applied along the edges can shatter the display, so extra care must be taken during installation.

Image quality, energy efficiency, size and location are just a few factors that will help you to determine the appropriate digital signage display.

Quick Things to Remember:

Color uniformity is affected by light. Indoor use causes various light levels.

Beware of optimal viewing distances.

For indoor environments, the key concern is image quality and contrast.

Comfortable viewing distance equals half of retina distance.

Content, application, perception and budget are final determinants of hardware choice.

Practical use of 4K UHD resolution in ProAV applications

By Mike Tsinberg – 6.13.2015
New native TV resolution of 3840pixels×2160lines is commonly described as 4K UHD (Ultra High Definition) format. 4K UHD has 8,294,400 pixels per frame that about four times the pixel count of Full High Definition 1080p format (1920×1080=2,073,600). It’s also defined to have a minimum of 16×9 aspect ratio and can be refreshed at 24 (23.98), 30 (29.97) or 60(59.94) frames per second.
4K UHD can quickly exceed all the available data bandwidth we have available through most common connectivity formats such as HDMI or HDBaseT, therefore we have to carefully define color and bit sampling depth.
As any other TV resolution format 4K UHD will undergo color sub-sampling in the TV studio for postproduction and transmission purposes.
Starting with 4K UHD TV studio cameras all images sampled in the so-called 4:4:4 format. Below is a 4×4 pixel grid that explains this format. Each pixel here is represented by Luminance Y pixel and two Color difference pixels: Cr (red differential) and Cb (blue differential). The matrix converting YCrCb to RGB is fully transparent. So this 4:4:4 format represents most color information available at the camera sensor.
4:4:4 Format

format

Traditionally in broadcast studios and postproduction facilities the 4:4:4 format is sub-sampled to so called 4:2:2 format were only half Cr/Cb samples are used in horizontal direction. Such sub-sampling is well suited for human vision because our retina has substantially less color resolution then black & white. Therefore for video material it is very hard to find any quality difference between 4:4:4 and 4:2:2 formats.
4:2:2 Format

2 format

To achieve further data rate reduction 4:2:0 is used as the transmission format of compressed TV programs. 4:2:0 takes advantage of the fact that our retina has reduces color resolution is all directions. 4:2:2 only reduces color resolution in horizontal direction. 4:2:0 reduces color resolution in both horizontal and vertical direction as it shown below:
4:2:0 Format

format

Again it is very hard to find any quality difference between 4:4:4 and 4:2:0 formats for regular video material.
All TV programs transmitted today via Terrestrial, Cable or Satellite or Internet streaming is encoded in 4:2:0 and 8 bit/pixel format before compression. The data saving is obvious. For example 4K UHD 4:4:4 8 bit/pix at 60F/s requires 12 Gb/s data rate. The 4K UHD 4:2:0 8 bit/pix at 60F/s requires 6 Gb/s data rate. That is reduction by factor of two for a change that is very hard to see on the TV screen.
Currently HDBaseT – now most commonly used digital connectivity format over twisted pair – support 4K UHD 4:2:0 8 bit/pix at 60F/s as per table below:

4k uhd

4K UHD 4:2:0 8 bit/pix at 60F/s is also part of latest HDMI 2.0 specification as per table below where Black is HDMI 1.4 spec and Orange is HDMI 2.0 spec.

hdbaset

Understanding HDCP 2.2 for 4K UHD

What is HDCP protection?

HDCP (or High-definition Digital Content Protection) is a digital content protection technology developed by Intel to help prevent copying of digital AV content – and, therefore, reduce piracy of movies and video content from DVD, BluRay, digital streaming, etc. by connecting a recording device into an AV system

So using the example of a simple AV system featuring a HDMI source and a display, the two devices will communicate with one another every 2 seconds to establish a HDCP handshake in order for HDCP encrypted content to be successfully displayed.

What’s new about HDCP version 2.2?

The latest version – HDCP 2.2 – has been developed to support 4K UHD video signals which we’re going to see more and more of over the next couple of years as UHD content becomes more commonly available.

HDCP 2.2 protects 4K UHD content and –theoretically – is a more secure protection protocol in order to protect all this new content that the movie makers and TV production companies are currently investing in.

It works through a number of encryption keys communicated between all devices on the AV system (think of it, perhaps, as a series of digital ‘handshakes’ between devices) to verify that Source devices (such as BluRay or HDTV satellite boxes), Display devices (screens or televisions) and Signal Control devices (such as Splitters or Matrices) within an AV system are all HDCP 2.2 compliant (and, therefore, are not ‘rogue’ unlicensed HDCP non-compliant recording devices).

In addition, this latest release of HDCP also features a ‘locality check’ – which prohibits sharing of HDCP 2.2 protected content over long distances. The locality check sends a random number from the Transmitter, which it needs to receive back from the Receiver device within 20 milliseconds in order to authenticate the signal.

How will this affect AV system?

At this early stage, still the majority of content we’re viewing is either at standard or HD resolutions and, therefore, you don’t need to change all of the devices on your systems straight away!

So if you’re sticking with 1080p video transmission, there’s currently nothing to worry about and your system is fine.

However, as we start to move towards 4K UHD content which will be carrying an HDCP 2.2 signal, your current devices are going to start having problems!

Unfortunately, HDCP version 2.2 isn’t backwards compatible with legacy devices and legacy devices aren’t upgradeable, with no firmware upgrades currently in the pipeline.

So what we suggest is that if you are considering moving towards UHD content anywhere in the near future, then any new devices you’re buying for your existing system and all devices if you’re looking to install a complete new system, then you should definitely be checking specifications for HDCP 2.2 compliance. (Many 4K UHD displays being released into the market feature both HDMI v2.0 and HDMI v1.4 ports, meaning that your screen will effectively be backwards compatible).

You may not need it right now (and it will still work with current systems and content), but as you move towards UHD in the near future, those ultra-high resolution images simply aren’t going to show on your screens or TVs!

HDBaseT: The Worldwide One-cable Standard

HDBaseT is the global standard for the transmission of ultra-high-definition video & audio, Ethernet, controls, USB and up to 100W of power over a single, long-distance, cable. For audiovisual, consumer electronics, and even industrial PCs, this can be a simple category cable (Cat6 or above), for up to 100m/328ft.  For medical and government applications, optical fiber is usually preferred, spanning several kilometers.  For automotive, HDBaseT can be transmitted over a single unshielded twisted pair (UTP), for up to 15m/50ft, or any other commonly used media (such as STP, HSD, coaxial and fiber).

Since its introduction in 2010, HDBaseT has revolutionized the video distribution sector.  It brings a rich feature set, increased reach, and better performance than existing solutions.  The cornerstone of the technology is 5Play, the converged and simultaneous delivery of uncompressed ultra-high-definition digital video and audio, Ethernet, USB, control signals and power over a single cable.

Today, HDBaseT is optimized for different markets, addressing the specific needs of such sectors as audiovisual, automotive, industrial PCs, consumer electronics and more. The common denominator in all these sectors is the need to distribute high-quality signals over the best, lowest-cost infrastructure, for the longest distance possible.  HDBaseT delivers quality of experience, eliminating cable clutter and without compromising performance and high quality.

Why HDBaseT?

Before HDBaseT, video professionals had some serious challenges to contend with, mostly: How to deliver high-quality content over a reasonable cable (both in terms of cost and ease of installation), for more than a few meters/feet?  Usually the answer involved some serious compromises on quality, distance, or cost and complexity.

Enter HDBaseT.

HDBaseT eliminated the compromises by offering:

Long-distance transmission: 100m/328ft with a single hop, or even more with several hops

Signal convergence: audio & video, Ethernet, controls, USB and power over a single cable, eliminating clutter, simplifying installation, with reduced infrastructure costs and low cabling weight

Performance: the current generation can deliver up to 4K (ultra-high-definition) video, and 8K is already in the roadmap

Simplicity: category (LAN) cable and UTP cables are easy to install and to field-terminate.  Cat cables also use standard RJ-45 lockable connectors.

Affordability: HDBaseT relies on low-cost infrastructure without compromising on performance, reducing not only installation but also maintenance costs; the ability to transmit power over HDBaseT eliminates the need for electrical cables and outlets near all of the devices

Standardization: HDBaseT is an industry standard, facilitating interoperability

Versatility: HDBaseT is an industry-proven technology, which can be easily adapted across different sectors

What is a video wall?

A video wall (also known as display wall) is a large visualization surface consisting of multiple displays. Originally, they consisted of multiple televisions or monitors that were put closely together. The objective was to make it seem as one large display surface. The problem however was the large frame (or bezel) that surrounded the useful display surface of each television. This completely tore down the effect of a single canvas and ruined the visual performance. Therefore, new technologies were introduced to minimize the ‘dead pixel space’ between the different displays. Today’s display wall solutions are generally using tiled LCD panels, rear-projection cubes, or direct LED tiles.

These display walls are available in a wide range of sizes, typically with a screen diameter between 46” and 80”. The choice of the screen size depends on the typical content and the viewing distance. If watched from up close, the pixel density should be high enough to not see the individual pixels. The resolution is subject to the wall size. For example, a 4K video wall requires 4 Full HD screens in a 2 x 2 setup.

Typical application areas include control rooms, meeting rooms, digital signage and other demanding environments.

Although these different technologies have very distinct merits, answering specific needs of users, they have a number of things in common. They all:

– Need a video wall controller to get content on the screens
– Are very flexible regarding size (number of individual displays)
– Need a calibration mechanism to ensure that all individual tiles have the same brightness and color settings. FOLAIDA’s automatic calibration technology does this in real-time, both calibrating single displays and entire walls
– Require a minimal inter-tile gap (or ultra narrow bezel) to counter the ‘raster effect’

LCD Video Wall Solutions

An LCD video wall consists of multiple specifically designed LCD displays. Contrary to the panels used in television sets, these LCD displays have a very narrow bezel. This minimizes the gap between the panels, making it look like one big canvas. Over the years, this gap has gradually decreased. Today, FOLAIDA has the smallest gap in the industry.

LCD video walls are designed for long term and intensive use, often playing in a 24/7 mode — which means they are rarely switched off. Specific measures to prevent burn-in effects are applied to allow them to play for many years, in optimal conditions.

The traditional benefits of LCD video wall solutions include the high brightness, good image quality, and relatively low cost. Also the limited real estate space needed is a plus. The disadvantages are the risk for burn-in and the lower lifetime. Recent models however have successfully reduced these drawbacks.

Typical markets for LCD display walls include meeting and crisis rooms, lobbies, and experience centers. You can also find them in the control rooms of traffic and security centers.

Workplace visualization: Understanding the purpose of display content

There’s a workplace visualization trend currently sweeping through the corporate world. Video walls that were once used to grab the attention of external visitors are now being turned inward, to engage employees and improve collaboration and productivity. In a world of hybrid working, creating an engaging and inspiring workplace is fast becoming a top priority.

During the lockdowns, productivity dropped 12% and engagement declined 14% among employees who were dissatisfied with remote work, getting worse the longer they stayed in. According to the Harvard Business Review, the top three features employees now want from their workplace are effective collaboration, easier access to tools and resources, and the ability to focus.

Workplaces that embrace multi-use spaces that can support a range of activities are becoming successful. The latest research from Gartner finds that to succeed in a hybrid future, organizations must shift to more human-centric models.

The macro trends driving employee experience

Piet Vanhuyse, Director Segment Marketing at Barco, has been excited by the shift to an employee-centric workplace, in particular when it comes to large video walls. He finds that being able to provide an engaging and immersive visualization platform in different types of settings, with seamless integrations across all areas of the corporate environment is essential. Piet identifies three trends that have converged towards creating a more immersive and employee-centric workplace, and increasing the ROI of large video walls:

1. Employees expectations. Employees now expect an improved, engaging, immersive digital experience at work, almost as an extension of their personal life. Workplace visualization is a vital element of that experience, and corporations are increasingly factoring that into their plans to facilitate productive collaboration. Having a workplace visualization strategy also creates an emotional connection with work, supports company culture, and helps employees enjoy the office.
2. A continuous and ongoing evolution of display technologies. These have come predominantly as offshoots or inheritors from the consumer TV world: LED created the desire for those technologies. LED and LCD complement the traditional projectors in the workplace and provide a broader and enhanced suite of experiences.
3. A dramatic cost curve decline for high quality display technology. The cost curve is allowing increased accessibility and greater ROIs for these enhanced display solutions, across added applications within the workplace. Combined with longer life, lower maintenance, and cloud-access to the displays, the cost of ownership is coming down.

Focus on the experience

According to Workplace Insight, maximizing the potential of workplace design can boost employee engagement. A resilient workplace is one that is most likely to have a positive impact on employee engagement levels; particularly since technology is a critical factor in giving employees more choice and control over where and how they work.

The user experience is all important if enterprises want to keep their employees engaged and productive. “The experience of the lobby or meeting space is good, it’s more conducive to engagement via a feel-good factor and you start seeing better productivity”, says Piet.

In recent years, Piet has seen the move from providing basic infrastructure – tables, chairs, a projector, or screen – to one that is more holistically focused on deepening the levels of emotional engagement. The aim is now to achieve a higher level of cognitive experience, both relaxation and engagement, enabled by technology in the space. A display can be very important in ensuring both ease of use and in facilitating, even inspiring, the discussion. Technology and display size, therefore, have a clear impact on the level of emotional engagement.

Achieving emotional engagement

Choosing the right content can help organizations achieve the objective to engage, excite and inspire people is as important as the type and size of display you use – in some cases even more so. Whether content for workplace visualization is managed by the communications function, creative team, HR or IT, Piet believes that the key is to have a clear mission for what you want to accomplish with it, and that the function that owns that mission understands and drives it: “They’re not just accountable for filling the screens or shifting the content every week, they have to have a clear mission for what they’re trying to accomplish.” The display is a powerful enabler of the overall objectives for the organization.

When there is a clear purpose behind the content, workplace visualization strategies have a strong impact on customers and employee satisfaction. The power of branding and corporate identity has become more important in the last two decades as information flow via the internet made the world flatter, allowing organizations to extend their brand globally, continuously and extensively through digital marketing. But to leverage that internally, you need a complimentary image, ethos, and culture within.

Workplace visualization can reinforce and enhance that culture, taking it to new levels with the advancement of large video walls. This impacts your talent, employee retention and productivity which goes beyond the initial cost of the investment providing bigger returns for your business. It allows you to harness the power of perception and meld it with the value of reality.

How to set the monitor dipswitches for wall configuration

Master/Slave Setting

The Master/slave setting for the NSL monitor is only changed in case of a DVI signal loop through configuration. In that configuration, the “DVI OUT to RS232 IN” cable cannot be used to make the RS232 (serial communication) loop. The RS232 connection between monitors is made through the DVI connection I²C signal.

Dip switch setting first monitor is always Master (RS232):
1 and 2 are switched off.
3 and 4 are switched on.

All other monitors are also Master when the DVI OUT of Monitor a is connected to RS232 IN of monitor b.

All other monitors are Slave when DVI loopthrough “DVI OUT to DVI IN cable is used.
1 and 2 are switched on.
3 and 4 are switched off.

Wall Configuration in X (horizontal) and Y (vertical)

Both X and Y switches represent the binary value (=> start counting at 0) of the Horizontal and Vertical position of the monitor in the wall.
As on below figure:
– In column, from monitor (0,0), to (0,1) and further with maximum till monitor (0,7) for the first column. Similar for column 2, 3 and 4.
– First row from monitor (0,0), to monitor (3,0), with maximum till monitor (15,0)
– Switch 4 of the Y dipswitches is extended to allow more addresses in the horizontal direction. (It is never used in vertical direction anyway, because maximum wall height is 8) Now addressing range for the horizontal count is maximum 31. (Ex monitor (17,0) is from top to bottom:
X1 = On
X2 = Off
X3 = Off
X4 = Off
Y1 = Off
Y2 = Off
Y3 = Off
Y4 = On

– Maximum wall size => 32 x 8   (0-31 x 0-7)

What features can I count on for my comprehensive visual needs?

  • Display a variety of content

Processors designed for video wall systems capture signals in different resolutions and formats from a wide range of devices such as cameras, computers, cable boxes, and more. All of these content sources are then accessed through a special software interface and displayed together on the video wall. A front projector or display alone can only connect with certain devices and are unable to display multiple content sources simultaneously.

  • Dynamic Content Placement

When using a video wall system, the controller enables all of the individual display “tiles” to work together as a single canvas. Based on the video wall software running the system, the processor can allow a piece of content to be placed on a single display, stretched across multiple displays, or dragged across the entire display surface. Multiple content windows can also be placed on a single display.

  • Content Manipulation Features

A processor with a feature-rich software interface provides a range of content management and manipulation tools. Content windows can be arranged, scaled, zoomed, cropped, and layered while active on the displays. Some software also provides advanced presentation-building features which allows users to create custom assets and automatic presentations.

  • Reliable & Resilient

Most video wall systems are built with industrial-grade components. Some are specifically designed for continuous 24/7 use in mission-critical environments. Consumer-grade projectors and displays use cheaper components and can’t provide the reliability or resilience of a professional video wall. Even high-end projectors require frequent maintenance and are vulnerable to vibration, humidity, and any light in the room.

  • Minimal Maintenance

Since video walls are designed for maximum reliability and uptime, most have no consumable parts and require virtually no maintenance over years of operation. In contrast, projectors demand regular downtime to replace expensive lamps and light engines. While a video wall system may initially cost more than a projector, their low maintenance costs make them a more affordable option for the long term.

  • Flexible Size & Shape

Flexibility in terms of size and shape makes a display wall stand out vs. a single display. Depending on the display type and how it is mounted, they can be attached to a wall, free-standing, curved, non-rectangular, or even three-dimensional. They can be small enough to be portable or scaled to massive sizes. This unique versatility means a video wall can be used in a wide range of location and use-cases.

H.265 VS H.264

LCD Video Wall for digital signage

As digital signage technology continues to expand, digital displays are exponentially increasing in size. Video walls are used in a variety of places where disseminating information is important and advertising is possible. This can include:

Auditoriums / Atriums / Broadcasts on-air / Concerts and events / Museums / Retail / Universities / Corporations / Hospitals / Casinos / Hotels.

Fortunately, there are a full range of digital signage technologies you can leverage for a video wall solution that works best for your business. Some of the key considerations before integrating a video wall solution should be:

Ease of implementation / Image quality / Location (indoor vs. outdoor) / Design flexibility / Physical footprint / Ease of maintenance and cost of repairs / Viewing distance.

What is an Ultra Narrow Bezel LCD?

When it comes to a video wall solution, LCDs have been the popular option for years, and an ultra-narrow bezel LCD is one of the best suited for the job. LCD stands for “liquid crystal display” and chances are, you use this technology every day with your smartphone.

LCD panels in a video display are composed of a layer of liquid crystal that is sandwiched between two polarized pieces of glass. When electricity is applied, the liquid shifts to create an image. Since the crystals in this liquid do not produce their own light, a backlight is created to illuminate the display. LEDs are the most common means of backlighting LCDs, and the technologies are often advertised as a package deal, i.e. “LED-LCD.”

Although LCD video walls are tiled like LEDs, there are spaces in-between the displays known as “bezels.” The ultra-narrow bezel design is the most ideal for video walls because it creates the smallest seams. In fact, with the liquid technology and a narrow bezel, video walls can display a highly uniform brightness.

Pixel Construction

Each pixel in an LCD consists of a molecular layer aligned between transparent electrodes and polarizing filters. Pixel is determined by an electric field and the placement of light. Other features:

Single multi-layered LCD module / 2M cells in the module / Pixel structure less visible / Dense pixel (compared to LED) / Advantages to Ultra Narrow Bezel LCD Digital Signage.

There is a reason why LCD technology has always been the prime choice for video walls. The following are some of the advantages to choosing this hardware for your digital signage installation:

Brilliant and fluid colors / Higher resolution / Energy efficient – reduce power consumption up to 50% / Most affordable option on the market / Easy to size and install / High uniform brightness / Slim installation depths / Better for indoors / Hardware is simple and easy to maintain / Brightness ≥ 500 – 700 cd/m2 / Ultra-narrow and takes up little space.

Please note, with the release of new sub-2 mm bezel gap displays, they have now become very fragile during installation. Due to the small piece of sheet metal holding the glass in place, any force applied along the edges can shatter the display, so extra care must be taken during installation.

Image quality, energy efficiency, size and location are just a few factors that will help you to determine the appropriate digital signage display.

Quick Things to Remember:

Color uniformity is affected by light. Indoor use causes various light levels.

Beware of optimal viewing distances.

For indoor environments, the key concern is image quality and contrast.

Comfortable viewing distance equals half of retina distance.

Content, application, perception and budget are final determinants of hardware choice.

LCD video wall

Practical use of 4K UHD resolution in ProAV applications

By Mike Tsinberg – 6.13.2015
New native TV resolution of 3840pixels×2160lines is commonly described as 4K UHD (Ultra High Definition) format. 4K UHD has 8,294,400 pixels per frame that about four times the pixel count of Full High Definition 1080p format (1920×1080=2,073,600). It’s also defined to have a minimum of 16×9 aspect ratio and can be refreshed at 24 (23.98), 30 (29.97) or 60(59.94) frames per second.
4K UHD can quickly exceed all the available data bandwidth we have available through most common connectivity formats such as HDMI or HDBaseT, therefore we have to carefully define color and bit sampling depth.
As any other TV resolution format 4K UHD will undergo color sub-sampling in the TV studio for postproduction and transmission purposes.
Starting with 4K UHD TV studio cameras all images sampled in the so-called 4:4:4 format. Below is a 4×4 pixel grid that explains this format. Each pixel here is represented by Luminance Y pixel and two Color difference pixels: Cr (red differential) and Cb (blue differential). The matrix converting YCrCb to RGB is fully transparent. So this 4:4:4 format represents most color information available at the camera sensor.
4:4:4 Format

format

Traditionally in broadcast studios and postproduction facilities the 4:4:4 format is sub-sampled to so called 4:2:2 format were only half Cr/Cb samples are used in horizontal direction. Such sub-sampling is well suited for human vision because our retina has substantially less color resolution then black & white. Therefore for video material it is very hard to find any quality difference between 4:4:4 and 4:2:2 formats.
4:2:2 Format

2 format

To achieve further data rate reduction 4:2:0 is used as the transmission format of compressed TV programs. 4:2:0 takes advantage of the fact that our retina has reduces color resolution is all directions. 4:2:2 only reduces color resolution in horizontal direction. 4:2:0 reduces color resolution in both horizontal and vertical direction as it shown below:
4:2:0 Format

format

Again it is very hard to find any quality difference between 4:4:4 and 4:2:0 formats for regular video material.
All TV programs transmitted today via Terrestrial, Cable or Satellite or Internet streaming is encoded in 4:2:0 and 8 bit/pixel format before compression. The data saving is obvious. For example 4K UHD 4:4:4 8 bit/pix at 60F/s requires 12 Gb/s data rate. The 4K UHD 4:2:0 8 bit/pix at 60F/s requires 6 Gb/s data rate. That is reduction by factor of two for a change that is very hard to see on the TV screen.
Currently HDBaseT – now most commonly used digital connectivity format over twisted pair – support 4K UHD 4:2:0 8 bit/pix at 60F/s as per table below:

4k uhd

4K UHD 4:2:0 8 bit/pix at 60F/s is also part of latest HDMI 2.0 specification as per table below where Black is HDMI 1.4 spec and Orange is HDMI 2.0 spec.

hdbaset

ProAV applications

Understanding HDCP 2.2 for 4K UHD

What is HDCP protection?

HDCP (or High-definition Digital Content Protection) is a digital content protection technology developed by Intel to help prevent copying of digital AV content – and, therefore, reduce piracy of movies and video content from DVD, BluRay, digital streaming, etc. by connecting a recording device into an AV system

So using the example of a simple AV system featuring a HDMI source and a display, the two devices will communicate with one another every 2 seconds to establish a HDCP handshake in order for HDCP encrypted content to be successfully displayed.

What’s new about HDCP version 2.2?

The latest version – HDCP 2.2 – has been developed to support 4K UHD video signals which we’re going to see more and more of over the next couple of years as UHD content becomes more commonly available.

HDCP 2.2 protects 4K UHD content and –theoretically – is a more secure protection protocol in order to protect all this new content that the movie makers and TV production companies are currently investing in.

It works through a number of encryption keys communicated between all devices on the AV system (think of it, perhaps, as a series of digital ‘handshakes’ between devices) to verify that Source devices (such as BluRay or HDTV satellite boxes), Display devices (screens or televisions) and Signal Control devices (such as Splitters or Matrices) within an AV system are all HDCP 2.2 compliant (and, therefore, are not ‘rogue’ unlicensed HDCP non-compliant recording devices).

In addition, this latest release of HDCP also features a ‘locality check’ – which prohibits sharing of HDCP 2.2 protected content over long distances. The locality check sends a random number from the Transmitter, which it needs to receive back from the Receiver device within 20 milliseconds in order to authenticate the signal.

How will this affect AV system?

At this early stage, still the majority of content we’re viewing is either at standard or HD resolutions and, therefore, you don’t need to change all of the devices on your systems straight away!

So if you’re sticking with 1080p video transmission, there’s currently nothing to worry about and your system is fine.

However, as we start to move towards 4K UHD content which will be carrying an HDCP 2.2 signal, your current devices are going to start having problems!

Unfortunately, HDCP version 2.2 isn’t backwards compatible with legacy devices and legacy devices aren’t upgradeable, with no firmware upgrades currently in the pipeline.

So what we suggest is that if you are considering moving towards UHD content anywhere in the near future, then any new devices you’re buying for your existing system and all devices if you’re looking to install a complete new system, then you should definitely be checking specifications for HDCP 2.2 compliance. (Many 4K UHD displays being released into the market feature both HDMI v2.0 and HDMI v1.4 ports, meaning that your screen will effectively be backwards compatible).

You may not need it right now (and it will still work with current systems and content), but as you move towards UHD in the near future, those ultra-high resolution images simply aren’t going to show on your screens or TVs!

HDCP 2.2 for 4K UHD

HDBaseT: The Worldwide One-cable Standard

HDBaseT is the global standard for the transmission of ultra-high-definition video & audio, Ethernet, controls, USB and up to 100W of power over a single, long-distance, cable. For audiovisual, consumer electronics, and even industrial PCs, this can be a simple category cable (Cat6 or above), for up to 100m/328ft.  For medical and government applications, optical fiber is usually preferred, spanning several kilometers.  For automotive, HDBaseT can be transmitted over a single unshielded twisted pair (UTP), for up to 15m/50ft, or any other commonly used media (such as STP, HSD, coaxial and fiber).

Since its introduction in 2010, HDBaseT has revolutionized the video distribution sector.  It brings a rich feature set, increased reach, and better performance than existing solutions.  The cornerstone of the technology is 5Play, the converged and simultaneous delivery of uncompressed ultra-high-definition digital video and audio, Ethernet, USB, control signals and power over a single cable.

Today, HDBaseT is optimized for different markets, addressing the specific needs of such sectors as audiovisual, automotive, industrial PCs, consumer electronics and more. The common denominator in all these sectors is the need to distribute high-quality signals over the best, lowest-cost infrastructure, for the longest distance possible.  HDBaseT delivers quality of experience, eliminating cable clutter and without compromising performance and high quality.

Why HDBaseT?

Before HDBaseT, video professionals had some serious challenges to contend with, mostly: How to deliver high-quality content over a reasonable cable (both in terms of cost and ease of installation), for more than a few meters/feet?  Usually the answer involved some serious compromises on quality, distance, or cost and complexity.

Enter HDBaseT.

HDBaseT eliminated the compromises by offering:

Long-distance transmission: 100m/328ft with a single hop, or even more with several hops

Signal convergence: audio & video, Ethernet, controls, USB and power over a single cable, eliminating clutter, simplifying installation, with reduced infrastructure costs and low cabling weight

Performance: the current generation can deliver up to 4K (ultra-high-definition) video, and 8K is already in the roadmap

Simplicity: category (LAN) cable and UTP cables are easy to install and to field-terminate.  Cat cables also use standard RJ-45 lockable connectors.

Affordability: HDBaseT relies on low-cost infrastructure without compromising on performance, reducing not only installation but also maintenance costs; the ability to transmit power over HDBaseT eliminates the need for electrical cables and outlets near all of the devices

Standardization: HDBaseT is an industry standard, facilitating interoperability

Versatility: HDBaseT is an industry-proven technology, which can be easily adapted across different sectors

What’s is HDBaseT

H.265 VS H.264: Comparison between H.265 (HEVC) and H.264 (AVC)

What’s difference between H.265 and H.264? This H.264 vs H.265 comparison shows you how H.265 (HEVC) advantages over H.264 (AVC)and help you find the best codec for video delivery without struggling with shortage of bandwidth, storage and quality.

The rise of 4K and 8K videos throws down a challenge to the current video compression standard H.264 since it no longer manages to encode Ultra HD videos at a satisfactory bit rate than the HD content. Contrarily, the next-gen H.265/HEVC video compression standard gains upper hand over H.264, thanks to its better compression efficiency. H.265 (HEVC) allows 50% reduction of bit rate yet delivers the same video quality as H.264 AVC, or in other word, greatly enhances the video quality and lower the artifacting at the same bit rate compared with the H.264 AVC. So to speak, H.265 is becoming the most commonly used formats for video compressing, distributing and recording 4K/8K UHD contents, let alone the HD/SD videos. So what is H.264? What is H.265? This H.264 vs H.265 comparison will focus on the definitions of High Efficiency Video Coding H.265 and Advanced Video Coding H.264, along with the differences between the two standards H.265 and H.264, based on file size, bandwidth usage, bit rate and quality.

What is H.265 (HEVC)?

H.265 is also called High Efficiency Video Coding (HEVC). As its name suggests, H.265 is twice high efficiency than H.264 when encoding video. Namely, it halves the bit rate at the same level of video quality compared with its predecessor. It is targeted at next-generation HDTV displays and content capture systems which feature progressive scanned frame rates and display resolutions, as well as improved picture quality in terms of noise level, color spaces, and dynamic range.

What is H.264 (AVC)?

H.264 or MPEG-4 AVC is a video coding format that is currently one of the most commonly used formats for video content compression and delivery. H.264 reported bit rate savings of 50% or more compared with its predecessor MPEG-2 Part 2. It has a wide range of applications, covering all compressed video ranging from low bit-rate streaming applications (YouTube, iTunes, Vimeo, Facebook, Instagram) to various HDTV broadcasts over terrestrial, cable, and satellite. It is also commonly used for Blu-ray Discs, DVD storage, IP packet network, and digital cinema applications with nearly lossless coding.

H.265 vs H.264: Compression Ratio

H.265 (aka HEVC) doubles the coding efficiency compared with its predecessor H.264. This means H.265 video saves around 50% of the bit rate at the same quality of coding. Specifically, the average bit reduction for H.265 is 64% at 4K UHD, 62% at 1080p, 56% at 720p and 52% at 480p. So if you download HEVC H265 movies instead of H264 movie, you can play HEVC on iPhone Android device with 50% storage saved. And the movie quality won’t be affected at all.

H.265 vs H.264: Bandwidth Use

H.265 is superior to H.264 regarding to the bandwidth usage. Because H.265’s algorithm uses the efficient coding, H.265 promises approximately 40-50% of reduction in transmission bandwidth needed to compress the video (e.g. in 720p) over H.264 at the same video quality. So you can enjoy 4k video smoothly even at 1-2 Mbs bandwidth constrained network connection. On the contrary, the UHD videos encoded with H.264 will be watched at a stuttering mode.

H.264 vs H.265: Quality

The big difference between H.265 and H.264 lies in the video quality at the same bit rate. In H.264, the border areas of the block are likely to be distorted, because each macroblock is fixed and the data is independent to each other. While H.265 offers sharper detailed on faces and fabrics and smooth gradient areas with less blocking and fewer artifacts, since the new standard determines the size of code unit based on regional information. So H.265 is better than H.264 when it comes to compress a video with better image quality.

HEVC vs H.264: File Size

The great compression ratio also has a great relationship with the digital storage requirement of video streams and transmission. The reduced bandwidth leads to smaller file size. Test shows a video encoded with H.264 is 1-3X larger than H.265. This is favorable for hard drive storage or the device with limited storage space required to house the video data.

HEVC vs H.264: Performance Comparison

H.265 vs H.264, which one is more suitable for you for videos playback? Of course, H.264 codec is applicable for almost all common devices. But things are not feasible to H.265. For devices that can decode HEVC video, performance is a concern.

H.265 VS H.264: Side-by-Side Comparison between H.265(HEVC) and H.264(AVC)

Category H.265/HEVC H.264/AVC
Name MPEG-H, HEVC, Part 2(Approved in Jan 2013) MPEG 4, Part 10, AVC (Introduced in 2004)
Application Area 1. Professional H.265 Encoder/Decoder2. High definition videos like 1080p, 4K, 8K resolution videos

3. Next-generation HDTV, Satellite TV

1.Blu-ray discs2.Streaming internet videos from Vimeo, YouTube, iTunes Store etc.

3. Web software like Adobe Flash Player and Microsoft Silverlight

4. HDTV broadcasts over terrestrial, cable, and satellite

Key Improvement 1. 40-50% bit rate reduction at the same visual quality compared to H.2642. Potential to realize UHD, 2K, 4K for Broadcast and Online (OTT) 1. 40-50% bit rate reduction compared to MPEG-22. Led the growth of HD content delivery for Broadcast and Online
Progression Successor to MPEG 4 AVC, H.264 Successor to MPEG-2 Part
Specification 1. Support up to 8K UHDTV (8192×4320)2. Supports up to 300 fps

3. 3 approved profiles, draft for additional 5 ; 13 levels

1. Support Up to 4K (4096×2304)2. Supports up to 59.94 fps

3. 21 profiles; 17 levels

Drawbacks Computationally expensive due to larger prediction units and expensive Motion Estimation Impracticable for delivering 4K/8K UHD content due to high bit rate requirements. Frame rate support restricted to 59.94.

Conclusion:

H.265 has many advantages over H.264, e.g. It supports up to 8K UHDTV (8192×4320 maximum), 4:4:4 and 4:2:2 chroma sub-sampling, supports up to 300 fps (earlier versions only supported up to 59.94 fps), data rates of several GB/s, and file size ‘subjectively’ half the size of H.264 with better quality! The H.265 has potential impact on accelerating 4k screens demand and sale, offering higher quality video even in bandwidth constrained network, etc.

FOLAIDA Smart Body Temperature Display/ Kiosk

Q1. What is the difference between FOLAIDA Smart Body Temperature Display /Kiosk and the other facial recognition thermometer equipment?

The thermal imaging principle of the thermal imager is consistent. The difference lies in the IR thermal sensor range and temperature measurement algorithm.

IR thermal IR thermal sensor range: Many manufacturers use industrial IR thermal sensors, which can demonstrate the measurement of hot water temperature of 50 ° C or even 60 ° C. As the range of industrial IR thermal sensors is generally from -20 ℃ to 150 ℃, the larger sensor range means the higher the error.

FOLAIDA Smart Body Temperature Display/Kiosk, use customized IR thermal sensor, the range is customized from 35 ℃, to 42℃. Optimized by algorithm to ambient temperature 20 ~ 30 ℃, distance 30 ~ 50cm, 2 seconds measurement time (no need of blackbody), accuracy ± 0.3 ℃

Temperature measurement algorithm: the temperature measurement module comes from Huawei, and IR thermal sensors from Melexis/Seiko/Omron. Abnormal temperature above 37.3 ℃ can be accurately tested at ambient temperature 15 ℃ ~ 35 ℃.

And many other suppliers use the temperature measurement method of manually adjusting the relative temperature value of the IR thermal sensor according to the value obtained from the forehead temperature gun (each person’s temperature is different). The ambient temperature needs to be calibrated once, and the individual temperature is different. There is also uncertainty in body temperature. It is equivalent to a laboratory product, a non-commercial product, will miss low fever personnel, and lose the original intention of temperature screening

FOLAIDA Smart Body Temperature Display/Kiosk is factory-corrected with high-precision blackbody calibration, without the need for manual correction through the forehead gun and ear thermometer, to ensure accurate and effective body temperature data.

Q2: What is the principle of thermal imaging of human body temperature measurement, and what are the influencing factors?

Any object with a temperature above absolute zero (-273.15 ° C) is constantly emitting infrared radiation (thermal radiation). Infrared radiation is an electromagnetic wave with a wavelength range of 0.7um-1000um, which is invisible to the human eye and different wavelengths of external radiation at different temperatures. After absorbing infrared radiation, the temperature of the heat sensitive material will increase, and the thermal imaging camera will then calculate the corresponding temperature information according to the corresponding temperature saving situation. For the human body, the body temperature is relatively constant (like: anal temperature: 36.6 ° C to 38 ° C; oral temperature: 35.8 ° C to 38 ° C, forehead temperature: 35.8 ° C to 37.8 ° C, face temperature: 32 ° C to 36 ° C). Thermal imaging measures temperature by detecting thermal radiation on the human surface. Based on human body temperature measurement big data, it is mapped to human body temperature through a temperature measurement algorithm.

Q3: Is blackbody needed for Infrared thermal imaging temperature measurement?

  1. Blackbody mode. Blackbody is a calibration device. You can set the temperature value. It is a standard temperature source. The thermal imaging device calibrates based on the temperature of the blackbody. The thermal imager is calibrated in real time with the black body (the black body is arranged on the opposite side of the thermal imager to ensure that the front side of the blackbody appears on the thermal imager screen) to ensure that the temperature measurement accuracy is at a high level (± 0.3 ° C accuracy). The bold body only needs to be powered, and no networking requirement.
  2. Human body temperature mode, replacing blackbody real-time calibration is the temperature measurement algorithm of the temperature measurement company. The temperature measurement algorithm needs to measure a large amount of raw data of the surface temperature detected by the thermal imager and the actual temperature of the human body in different ambient temperatures, and then based on the principle of human body temperature In-depth learning results in a temperature offset table, which is the core of every temperature measurement company.

Q4: Can we install FOLAIDA Smart Body Temperature Display/Kiosk for outdoors?

The optimal installation environment is indoors (or a relatively isolated area from the outdoor), and the ambient temperature is 15 ~ 30 ℃. Because sunlight, wind, cold air, and air conditioning will affect the body surface temperature and the measurement result, would be different with the real body temperature.

Of course, if you do not have a suitable indoor environment, need to use FOLAIDA smart body temperature display/kiosk at the indoor and outdoor direct-through area, or outdoor door place. We would suggest you could build a temporary temperature measurement channel there to create a more stable temperature measurement environment.

Q5. What are the influencing factors of temperature measurement?

Wind, which causes heat dissipation, would take away the heat of forehead, and affect the accuracy of temperature measurement.

Sweating, which would bring the human body to cool down automatically. Therefore, when we sweat, our body temperature also decreases.

Ambient temperature, if the room temperature is too low, will directly take away our body heat. Temperatures below 15 degrees are not suitable for body temperature measure; because the temperature of our forehead will become lower due to low room temperature. Similarly, if the temperature is too high, we would sweat and the forehead temperature will also decrease; these will cause inaccurate temperature test results.

For the thermal imager is sensitive to light waves with a wavelength of 10 ~ 15 um, we should avoid using this temperature measurement method in the environment of the sun, fluorescent light sources, air conditioning vents, heating, cold vents, glass surfaces, etc.

Copyright © Shenzhen Bolise Vision Technology Co., Ltd. | All Rights Reserved